Isomerized Hop Extract 30%

Description

Iso-Extract 30% is an aqueous solution of the potassium salts of iso-alpha acids. ISO 30% can be used post fermentation to top-up bitterness or to partially replace traditional forms of bittering. ISO 30% is added immediately before filtration for best yield results.

Advantages

  • Bitterness
  • Foam
  • Anti-microbial

Usage & Methods

  • Dose anytime during kettle boil as a partial replacement for kettle hopping
  • Post fermentation for touching up IBU’s
    • Post fermentation utilization 85% – 90%
    • Dose anytime during kettle boil as a partial replacement for kettle hopping
      • Good – add product to empty vessel and push with nitrogen (NOT CO2) into beer line when starting to fill tank
      • Better – add product to empty beer keg and fill with pH 8-9 adjusted de-aerated, de-ionized water and push with nitrogen (NOT CO2) into beer line when starting to fill tank
      • Best – meter the concentrated product into transfer stream using a diaphragm pump. Attempt to deliver evenly throughout 80% of the transfer of beer. Dispense solution into the beer transfer stream pre filtration
  • Inject on suction side of beer transfer pump
  • Link to methods for bench-top testing in bottles or kegs.

Notes & Suggestions

  • Limit use of product to 30% – 40% of total bitterness to avoid a noticeable change in the bitter quality
  • Post fermentation for best utilization and efficiency (85%-90%)
  • Do not add to DE slurry tanks
  • Make sure introduced at least 5 Meters upstream of filter
  • Diluting with beer lowers utilization and can result in precipitation of resins.
  • Product will freeze – must ship next day air during winter months

Package & Storage

  • 1 kg. containers
  • 20 kg. pails
  • Also available in 10 & 20%?
  • Open containers should be used within 3-4 weeks and headspace purged using nitrogen (avoid using CO2)

 

 

Product Dosing Rate
Concentration: %
Utilization: %
BBL:
PPM:
kg of Product: kg

Online calculators are designed to be informational and educational tools only. This online calculator is provided as a rough approximation and the results presented by this calculator are hypothetical and may not reflect total accuracy. Hopsteiner is not responsible for the consequences of any decisions or actions taken in reliance, nor responsible for any human or mechanical errors or omissions upon or as a result of the information provided by these tools.


Column1Column2Column3Column4Column5Column6Column7Column8
ProductFunctionalityAddition
BitternessAroma / FlavorFoamAnti - microbialLight StabilityHot SideCold Side
Kettle Product
Lupulin PelletsHop ConeHop ConeHop ConeHop Cone
CO2-ExtractHop ConeHop ConeHop Cone
HopFlowHop ConeHop ConeHop Cone
Isomerized Kettle Extract (IKE)Hop ConeHop Cone
(Potassium) Isomerized Kettle Extract (PIKE)Hop ConeHop Cone
Salvo®Hop ConeHop ConeHop Cone
Downstream Products
Alpha Extract 20%Hop ConeHop ConeHop Cone
Iso-Extract 30%Hop ConeHop ConeHop ConeHop ConeHop Cone
Rho Iso-Extract 30%Hop ConeHop ConeHop ConeHop ConeHop Cone
Tetra Iso-Extract 10%Hop ConeHop ConeHop ConeHop ConeHop Cone
Hexa Iso-Extract 10%Hop ConeHop ConeHop ConeHop ConeHop Cone
Beta Bio 45%Hop ConeHop ConeHop Cone
Hop OilsHop ConeHop ConeHop Cone